Delta AH500 Programming Manual page 525

1. Take 0.5 for example. When it is entered, users need to enter 0, 0, and 16#5000 into S, S+1,
S+2 respectively.
2. If the value in S is not a binary-coded decimal value (The binary-coded decimal value is
represented by the hexadecimal number, but one of digits is not within the range between 0
and 9.), the operation error occurs, SM0 is ON, and the error code in SR0 is 16#200D.
3. The value specified by the operand S should be within the range between –1.0 and +1.0. If the
value specified by the operand S is not within the range, the instruction is not executed, SM0 is
ON, and the error code in SR0 is 16#2003.
4. If users declare the operand S in ISPSoft, the data type will be ARRAY [3] of WORD/IN.
Ch a pt er 6 Ap p l i ed I ns t r uc t i ons
6 - 3 5 7