Ah10En-5A / Ah-15En-5A - Delta AH500 Programming Manual

AH 5 00 Pr ogr am m ing Ma n ua l
Error code
The pointer used in JMP is the same as the pointer
16#A009
used in CALL.
16#A00B Target position (I) of the single speed is incorrect.
Target position (II) of the single-axis motion is
16#A00C
incorrect.
The setting of speed (I) of the single-axis motion is
16#A00D
incorrect.
The setting of speed (II) of the single-axis motion is
16#A00E
incorrect.
The setting of the speed (V
16#A00F
incorrect.
The setting of the deceleration (V
16#A010
zero is incorrect.
16#A011 The setting of the JOG speed is incorrect.
The positive pulses generated by the single-axis
16#A012
clockwise motion are inhibited.
The negative pulses generated by the single-axis
16#A013
counterclockwise motion are inhibited.
16#A014 The limit switch is reached.
16#A015 The device which is used exceeds the device range.
An error occurs when the device is modified by a 16-bit
16#A017
index register/32-bit index register.
The conversion into the floating-point number is
16#A018
incorrect.
The conversion into the binary-coded decimal number
16#A019
is incorrect.
16#A01A
Incorrect division operation (The divisor is 0.)
16#A01B General program error
16#A01C LD/LDI has been used more than nine times.
There is more than one level of nested program
16#A01D
structure supported by RPT/RPE.
16#A01E SRET is used between RPT and RPE.
16#A01F Incorrect division operation (The divisor is 0.)
The wrong instruction is used, or the device used
16#A020
exceeds the range.
7.1.6

AH10EN-5A / AH-15EN-5A

Error code
The IP address of host 1 conflicts with another system
16#A001
on the network.
The IP address of host 2 conflicts with another system
16#A002
on the network.
16#A003 DHCP for host 1 fails.
16#A004 DHCP for host 2 fails.
16#A401 Hardware error
16#A402 The initialization of the system fails.
7 - 2 6
Description
) of returning to zero is
RT
) of returning to
CR
Description
LED indicator status
CPU Module
BUS
ERROR
FAULT
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
Blinking
LED indicator status
CPU Module
BUS
Error
FAULT
Blinking
Blinking
Blinking
Blinking
ON
ON