Delta AH500 Programming Manual page 499

F loating- point
number
DINT
Additional remark:
1. The floating-point number specified by the operand S should be within the range between –1.0
and +1.0. If the floating-point number is not within the range, the instruction is not executed,
SM0 is ON, and the error code in SR0 is 16#2003.
2. If the value in S exceeds the range of values which can be represented by the floating-point
numbers, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2013.
F ACO S
D11~D10
D0
R1 R3.141592
F loating- point
number
BCD
D31~D30
180
Binary v al ue
Ch a pt er 6 Ap p l i ed I ns t r uc t i ons
F DEG
D21~D20
R180
F loating- point
number
Y1.15~Y1.0
0 1 8 0
Binary -coded
decimal value
6 - 3 3 1