Delta AH500 Programming Manual page 328

Hide thumbs Also See for AH500:

Table of Contents

AH 5 00 Pr ogr am m ing Ma n ua l

When the conditional contact X0.0 is followed by the normally-closed contact Y0.0, the flashing

currents pass through Y0.1 and Y0.2. When X0.0 is switched OFF, Y0.0, Y0.1, and Y0.3 are

switched OFF, and T0 is reset to 0.

Additional remark:

If D+3 exceeds the device range, the instruction is not executed, SM0 is ON, and the error

code in SR0 is 16#2003.

If m is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is

If users declare the operand D in ISPSoft, the data type will be ARRAY [4] of BOOL.

Chapters

Table of Contents