Delta AH500 Programming Manual page 64

Limited Special auxiliary
to relay
AH5×1
SM1597~SM11630 Users set the flag to ON and reset it to OFF.
SM1720~SM1751 Users set the flag to ON and reset it to OFF.
AH5×0
SM1769
AH5×1
AH5×0
SM1770
AH5×1
SM1771
SM1772~SM1788 Users set the flag ON and reset it OFF.
AH5×0
AH5×1
SM1789
AH5×0
SM1790~SM1805
AH5×1
AH5×0
SM1806
AH5×1
SM1807
AH5×0
SM1808~SM1823
AH5×1
SM1824~SM1911 The flag is refreshed every scan cycle.
AH5×0
SM1912
AH5×1
SM1913~SM1951 The flag is refreshed every scan cycle.
SM2000
SM2001
SM2002
SM2003
SM2004
SM2005
SM2006
SM2007
SM2008
SM2009
SM2010
SM2011
SM2012
SM2013
SM2014
SM2015
SM2016
SM2017
SM1596 is ON when the COM1-Modbus connection is enabled
and an error occurs.
SM1769 is ON when there is an error in the Ether Link.
The flag is refreshed every scan cycle.
Users set the flag ON and reset it OFF.
The flag is refreshed every scan cycle.
Users set the flag to ON and reset it to OFF.
The flag is refreshed every scan cycle.
The flag is refreshed every scan cycle.
The flag is ON when an error occurs in the corresponding
communication port.
The flag is refreshed every scan cycle.
The flag is ON when the Ether Link function of the corresponding
communication port is enabled.
The flag is refreshed every scan cycle.
The flag is refreshed every scan cycle.
The flag is ON when the Ether Link function of the corresponding
communication port is enabled.
The flag is refreshed every scan cycle.
The flag is refreshed every scan cycle.
Users set the flag ON and reset it OFF.
User define. The flag is refreshed, after the transmission is done.
The flag is refreshed when the instruction EMDRW is executed.
The flag is refreshed when the instruction EMDRW is executed.
The flag is refreshed when the instruction EMDRW is executed
and an error occurs.
The flag is refreshed when the instruction EMDRW is executed
and there is a response timeout.
The flag is refreshed when the instruction EMDRW is executed.
User define. The flag is refreshed, after the transmission is done.
The flag is refreshed when the instruction EMDRW is executed.
The flag is refreshed when the instruction EMDRW is executed.
The flag is refreshed when the instruction EMDRW is executed
and an error occurs.
The flag is refreshed when the instruction EMDRW is executed
and there is a response timeout.
The flag is refreshed when the instruction EMDRW is executed.
User define. The flag is refreshed, after the transmission is done.
The flag is refreshed when the instruction EMDRW is executed.
The flag is refreshed when the instruction EMDRW is executed.
The flag is refreshed when the instruction EMDRW is executed
and an error occurs.
The flag is refreshed when the instruction EMDRW is executed
and there is a response timeout.
The flag is refreshed when the instruction EMDRW is executed.
Ch a pt er 2 De v ic es
Refresh time
2 - 4 5