Delta AH500 Programming Manual page 61

AH 5 00 Pr ogr am m ing Ma n ua l
Limited Special auxiliary
to relay
SM1132
SM1133
SM1134
SM1135
SM1136
SM1137
SM1138
SM1139
SM1140
SM1141
SM1142
SM1143
SM1144
SM1145
SM1146
SM1147
SM1148
SM1149
SM1150
SM1151
SM1152
SM1153
SM1154
SM1155
SM1156
SM1157
SM1158
SM1159
SM1160
2 - 4 2
SM1132 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1133 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1134 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1135 is ON when the trigger is enabled and the attachment is
not found.
SM1136 is ON when the trigger of the PLC parameter is enabled.
SM1137 is ON when the trigger of the PLC parameter is triggered.
SM1138 is ON when the trigger is enabled and no mail has been
sent.
SM1139 is ON when the trigger is enabled and the last mail has
been sent successfully.
SM1140 is ON when the trigger is enabled and the last mail has
been sent in error.
SM1141 is ON when the trigger is enabled and the mail has been
sent.
SM1142 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1143 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1144 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1145 is ON when the trigger is enabled and the attachment is
not found.
SM1146 is ON when the trigger of the PLC parameter is enabled.
SM1147 is ON when the trigger of the PLC parameter is triggered.
SM1148 is ON when the trigger is enabled and no mail has been
sent.
SM1149 is ON when the trigger is enabled and the last mail has
been sent successfully.
SM1150 is ON when the trigger is enabled and the last mail has
been sent in error.
SM1151 is ON when the trigger is enabled and the mail has been
sent.
SM1152 is ON when the trigger is enabled and there is an SMTP
server response timeout.
SM1153 is ON when the trigger is enabled and there is an SMTP
server response error.
SM1154 is ON when the trigger is enabled and the size of the
attachment exceeds the limit.
SM1155 is ON when the trigger is enabled and the attachment is
not found.
SM1156 is ON when the trigger of the PLC parameter is enabled.
SM1157 is ON when the trigger of the PLC parameter is triggered.
SM1158 is ON when the trigger is enabled and no mail has been
sent.
SM1159 is ON when the trigger is enabled and the last mail has
been sent successfully.
SM1160 is ON when the trigger is enabled and the last mail has
been sent in error.
Refresh time