Delta AH500 Programming Manual page 404

AH 5 00 Pr ogr am m ing Ma n ua l
X 0.3 X 0.2 X 0.1 X 0.0
5
M1 5 M1 4 M1 3 M1 2 M11 M1 0 M9
Example 2:
1. When X0.0 is switched from OFF to ON, the states of the sixteen bit devices starting from M0
are divided into groups (five bits as a group), and these groups are shifted to the right.
2. The shift of the states of the bit devices to the right during a scan is illustrated as follows.
 M0
 M5
 M10~M6
 M15~M11
 X0.4~X0.0
X 0.3 X 0.2 X 0.1 X 0.0
X 0.4
5
M1 5 M1 4 M1 3 M1 2 M11 M1 0 M9
Additional remark:
1. If S+n -1 or D+n -1 exceeds the device range, the instruction is not executed, SM0 is ON, and
2 1
the error code in SR0 is 16#2003.
2. If n is less than 1, or if n
1
the error code in SR0 is 16#200B.
3. If n is less than 1, or if n
2
error code in SR0 is 16#200B.
6 - 2 3 6
F our bits as a group ar e shifted to the r ight.
M8
4
→ Being carried
→ M0
→ M5~M1
→ M10~M6
→ M15~M11
F ive bits as a group is s hifted to the right.
M8
4
is larger than 1024, the instruction is not executed, SM0 is ON, and
1
is larger than n , the instruction is not executed, SM0 is ON, and the
2 1
M7 M6 M5 M4 M3
3 2
M7 M6 M5 M4 M3
3
M2 M1 M0
1
M2 M1 M0
1
2