Delta AH500 Programming Manual page 446

AH 5 00 Pr ogr am m ing Ma n ua l
Additional remark:
1. If the operand n used in the 16-bit instruction is less than 1 or larger than 256, the instruction is
not executed, SM0 is ON, and the error code in SR0 is 16#200B.
2. If the operand n used in the 32-bit instruction is less than 1 or larger than 128, the instruction is
not executed, SM0 is ON, and the error code in SR0 is 16#200B.
3.
If S+n-1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error
code in SR0 is 16#2003.
6 - 2 7 8