Delta AH500 Programming Manual page 696

AH 5 00 Pr ogr am m ing Ma n ua l
Item
File format
Function option
Reserved

S: The data source

S : The length of the data which is written into the file
1
If the value in S
Item
Value unit
Parameter unit
Length of the data

S : The line advance
2
The value in S

S ~S +4: S occupies five devices. Nine characters at most constitute a file name,
3 3 3
including 16#00. If the string does not end with 16#00, the error occurs. If the
6 - 5 2 8
Code
The file name extension is .cvs.
2 The ASCII codes are adopted.
The value which is stored is a hexadecimal value.
The values are separated by a tab.
The unit of the value is the word.
3 The file name extension is .txt.
The ASCII codes are adopted.
The value which is stored is a hexadecimal value.
The values are separated by a tab.
The unit of the value is the double word.
4 The file name extension is .txt.
The ASCII codes are adopted.
The value which is stored is a hexadecimal value.
The values are not separated by any mark.
The unit of the value is the word.
5 The file name extension is .txt.
The ASCII codes are adopted.
The value which is stored is a hexadecimal value.
The values are not separated by any mark.
The unit of the value is the double word.
6 The file name extension is .txt.
The ASCII codes are adopted.
The value which is stored is a hexadecimal value.
Appending
The data which is written into the memory card is added after
the last value in the file.
0
Default value
If the file does not exist, it is created automatically.
Overwriting
The data which is written into the memory card replaces the
values in the file starting from the value indicated by the value
1
in S .
4
If the file does not exist, it is created automatically.
- The values of bit8~bit15 are 0.
is 0, the data is not written into the file.
1
If the file format is 0, 1, 3, or 5, the unit of the value is the word. If
the file format is 2, 4, or 6, the unit of the value is the double word.
Double word
The devices in which the data is stored can not exceed the device
range, and the size of the data which is written into the file can
not be more than four gigabytes.
(Please refer to chapter 2 for more information about the
devices.)
should be within the range between 0 and 256.
2
Description
Description