Delta AH500 Programming Manual page 330

AH 5 00 Pr ogr am m ing Ma n ua l
D10
The number of scan cycl e i s n.
Additional remark:
1. If D+1 exceeds the device range, the instruction is not executed, SM0 is ON, and the error
code in SR0 is 16#2003.
2. If n is less than 0, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#200B.
3. If users declare the operand D in ISPSoft, the data type will be ARRAY [2] of WORD/INT.
4. When SM686 is ON/OFF, the value in D12 changes as follows.
SM686=O N
X0.0
T he signal is enabled.
D11
D10
SM687
6 - 1 6 2
D11
D12
D10<D11
The number of scan cycl e i s stored i n D13.
D12
D10
D12
D11
The number of scan cycl e i s n.
D10>D11
SM686=O FF
X0.0
T he signal is enabled.
D11
D12
D10
SM687