Delta AH500 Programming Manual page 273

Additional remark:
1. The value in S which is used in the 16-bit instruction should be within the range between the
1
minimum source value and the maximum source value, i.e. between -32,768 and 32,767. If the
value exceeds the boundary value, the boundary value is used in the operation.
2. The integer in S which is used in the 32-bit instruction should be within the range between the
1
minimum source value and the maximum source value, i.e. between -2,147,483,648 and
2,147,483,647. If the integer exceeds the boundary value, the boundary value is used in the
operation.
3. The floating-point number in S
range between the minimum source value and the maximum source value, i.e. within the
range of floating-point numbers. If the floating-point number exceeds the boundary value, the
boundary value is used in the operation.
which is used in the 32-bit instruction should be within the
1
Ch a pt er 6 Ap p l i ed I ns t r uc t i ons
6 - 1 0 5