Delta AH500 Programming Manual page 300

AH 5 00 Pr ogr am m ing Ma n ua l
Additional remark:
1. Suppose the data involved in the instruction is binary-coded decimal numbers. If the number in
S is not within the range between 0 and 9999, or if the number in D is not within the range
between 0 and 9999, the instruction is not executed, SM0 is ON, and the error code in SR0 is
16#200D.
2. If m is less than 1, or if m
1
error code in SR0 is 16#200B.
3. If m is less than 1, or if m
2
the error code in SR0 is 16#200B.
4. If n is less than m
2
error code in SR0 is 16#200B.
6 - 1 3 2
is larger than 4, the instruction is not executed, SM0 is ON, and the
1
is larger than m
2
, or if n is larger than 4, the instruction is not executed, SM0 is ON, and the
, the instruction is not executed, SM0 is ON, and
1