Delta AH500 Programming Manual page 595

7. If the number of devices starting from S
be executed, SM0 will be ON, and the error code in SR0 will be 16#2003.
8. If the value in D is not in the range of 0 to 6, the instruction will not be executed, SM0 will be
2
ON, and the error code in SR0 will be 16#2003.
9. If the value in D is 6, and the number of devices starting from D
2
D +1, the instruction will not be executed, SM0 will be ON, and the error code in SR0 will be
2
16#2003.
10. If the value in S is in the range of 1 to 5, and the quantity of data received is greater than the
2
number of devices starting from D
11. If a completion flag is ON, the PLC will stop receiving data. If a communication port receives
data when a completion flag is ON, the data will not be received.
12. If the setting value in S
SM0 will be ON, and the error code in SR0 will be 16#2003.
is not equal to the value in S
2
, the data which can not be stored will be ignored.
1
is less than 0 or greater than 1000, the instruction will not be executed,
3
C ha pt er 6 A p pl i e d In s tr uc t io n
, the instruction will not
3
is not equal to the value in
1
6 - 4 2 7