Delta AH500 Programming Manual page 630

AH 5 00 Pr ogr am m ing Ma n ua l
( D11, D10)
12345678
( D1, D0)
( D2, D3)
Additional remark:
1. If the value in S exceeds the range, the instruction is not executed, SM0 is ON, and the error
1
code in SR0 is 16#2003.
2. If the value in S +1 exceeds the range, the instruction is not executed, SM0 is ON, and the
1
error code in SR0 is 16#2003.
3. The value in S +1 should be less than or equal to the value in S
1
instruction is not executed, SM0 is ON, and the error code in SR0 is 16#2003.
4. If the value in S is less than the number of digits in S
1
include the decimal point and the sign, the instruction is not executed, SM0 is ON, and the
error code in SR0 is 16#2003.
5. If the operand S used during the execution of the 16-bit instruction is declared in ISPSoft, the
1
data type will be ARRAY [2] of WORD/INT.
6. If the operand S used during the execution of the 32-bit instruction is declared in ISPSoft, the
1
data type will be ARRAY [2] of DWORD/DINT.
6 - 4 6 2
" 0.012345678"
12
9
b8 b7 b0
b15
16#30( 0) 16#20( )
16#2E(.)
16#30( 0)
16#32( 2) 16#31( 1)
16#34( 4) 16#33( 3)
16#35( 5)
16#36( 6)
16#38( 8) 16#37( 7)
16#00
minus 3. Otherwise, the
1
plus the number of characters which
2
D20
D21
D22
D23
D24
D25
D26