Removal Of Cylinder Components; 1) Dismantle Cylinder Head Cover; 2) Combustion Chamber Insert - Rotax 125 Max Retrofit Instruction

4.4) REMOVAL OF CYLINDER COMPONENTS

4.4.1) Dismantle cylinder head cover

 Loosen 4 Allen screws M6 crosswise from the cylinder head cover.
 Remove the cylinder head cover.
 Caution:

4.4.2) Combustion chamber insert

 Loosen 5 hex. screws (SW13) crosswise from the combustion chamber insert.
Seite/page 42/59
Umbauanleitung/retrofit instruction 125 MAX Series
Seal may stick to the cylinder head cover.
1
3
4
2
Ausgabe/Edition 09/2014
Fig. 19 (K00320)
Fig. 20 (K00324)