Figure 133. Removing screws at the front of the library
12. Remove the flat-head screws 8 to remove the left 3 and right 4 front brackets from the front of
the library chassis (Figure 134).
8
Figure 134. Removing the front brackets from the library chassis
Installing the library on a desktop
For details on the deskside kit components, see "Installing the Deskside Cover" on page 23.
1. Attach the left 5 and right 3 rails to the chassis with 3 flat-head screws 6 on each side
(Figure 135 on page 145).
144
IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572
11
3
4
8