Tape Drive Sense Data; Ultrium Tape Drive Sense Data - IBM TS2900 Setup, Operator, And Service Manual

Table 39. Library sense data (continued)
Sense Key
Aborted Command (0B)
* This code is preserved only in the library log when "FID" or "ATTN DRV" message is received from the tape
drive. This code is not reported to the host server.
** This code is preserved only in the library log. This code is not reported to the host server.

Tape drive sense data

Table 40. Ultrium Tape drive sense data
Byte
7
0 Valid
Address Bit
1
2 Filemark
3
4-5
6
7
8-11
12-13 For Ultrium Tape drive sense data for Bytes 12 and 13, see Table 41 on page 210.
14
15 SKSV
16-17
18-19
20
21
22-28
29
30-33
34
35
36-39
This is the hashed SAS address of the drive port (for example, F32A94) with byte 36 being reserved.
ASC
41
6 5
EOM ILI Reserved
(End of (Incorrect
medium) length
indicator
Information byte (most significant byte)
Information byte (least significant byte)
Additional sense length
Command specific information bytes
Field Replaceable Unit (FRU) ID
C/D Reserved
SKSV =0: First Error Fault Symptom Code (FSC); SKSV = 1: Field Pointer
Frame number
Port Identifier (Relative Target Port Address) Reporting Sense
ASCQ
nn LDI command failure**
Bit Address or Name
4 3
Error Code
Segment Number x'00'
See "Sense Key definitions" on page 207.
Information bytes
BPV
(Bit pointer
valid)
First Error Flag Data
Reserved (0)
CLN
Volume Label
Current Wrap
Relative LPOS
SCSI Address
Description
2 1
Sense Key
Bit pointer
Reserved Reserved
Drive number
Appendix D. Sense data
0
VolValid
209