Removing The Feet - IBM TS2900 Setup, Operator, And Service Manual

Figure 143. Removing the feet
12. Remove the flat-head screws 6 on each side to remove the left 5 and right 3 rails from the
chassis (Figure 144)
6
Figure 144. Removing side rails from the library chassis
Installing the library in a rack
For details on the rack mount kit components, see "Installing in a rack" on page 26.
1. Determine the location in your rack for your library and mark with a pencil. For details on rack
mount locations, see "Installing in a rack" on page 26.
2. Attach the left 3 and right 4 front brackets to the front of the library chassis with 2 flat-head
screws 8 on each side (Figure 145 on page 150). Use the bottom two screw holes on each side.
1
5
1
3
6
Removal and replacement procedures
149