Uploading And Configuring The Ssl Certificate; Certificate Screen - IBM TS2900 Setup, Operator, And Service Manual

Uploading and configuring the SSL certificate

|
|
| Figure 103. Certificate screen
|
This library takes in certificate content and key content in two separate .pem files. The library requires a
browser restart or library power reset for a certificate change or update.
|
1. Use Configure Library > Certificate to upload a SSL certificate.
|
| 2. In the Import box, click the Browse... buttons to navigate to the Certificate and Private Key files to be
imported.
|
3. When the Certificate and Private Key files are selected, click Import in the Import box.
|
4. Click Ok in the message box to start the certificate import.
|
| 5. When the import completes, an Import was successful message appears. Click OK.
Where the current SSL session uses the previous certificate as-is, the new SSL session uses the
|
imported Certificate. Log off, close and restart the browser, and log back in, using the new imported
|
Certificate.
|
6. The information for the imported Certificate is shown.
98
IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572