Logging In To The Web User Interface; Checking Firmware Level; Web User Interface Login Screen - IBM TS2900 Setup, Operator, And Service Manual

10. "Saving the library configuration" on page 53

Logging in to the Web User Interface

To log in to the Web User Interface:
1. If necessary, obtain the IP address of the library on the Operator Panel.
a. From the top menu of the Operator Panel, press the Minus key to select View Current
Information, and press Enter.
b. Press the Minus key until the IP Address setting is displayed and make a note of the IP address.
c. Press the Cancel key repeatedly to log out of the Operator Panel.
2. Open Internet Explorer on your server or PC to access the Web User Interface.
3. In the browser address field, enter your library's IP address URL to start the Web User Interface
applet in the browser window. For example, http://192.168.1.1
4. On the Web User Interface login screen, enter the administrator login account name and default
password.
v Account: admin
v Password: secure
|
|
|
Figure 32. Web User Interface login screen
|
5. Click Login.

Checking firmware level

To determine the latest supported firmware level:
1. Visit the web at http://www.ibm.com/support/fixcentral.
2. Select Storage Systems from the Product Group menu.
3. Select Tape Systems from the Product Family menu.
4. Select the appropriate link from the Product Type menu. For example, select Tape autoloaders and
libraries from the Product Type menu, then TS2900 Autoloader from the Product menu to find links
to updates.
Check the current level of library firmware that is displayed in the Versions box of the System Summary
page. If an updated level of firmware is available, download and update the library firmware before
normal operation starts. See "Updating library and drive firmware" on page 104.
38
IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572