Parts List; Features; Customer Replaceable Units (Crus); Optional Features - IBM TS2900 Setup, Operator, And Service Manual

Parts list

"Features"

"Customer Replaceable Units (CRUs)"

"Power cords and receptacles" on page 160
Features
Table 27. Optional features
Description
2 m SAS/Mini-SAS 1x Cable
(from HBA with SFF-8470 to drive
with SFF-8088).
5.5 m SAS/Mini-SAS 1x Cable
(from HBA with SFF-8470 to drive
with SFF-8088).
2 m Mini-SAS/Mini-SAS 1x Cable
(from HBA/Interposer with SFF-8088
to drive with SFF-8088).
5.5 m Mini-SAS/Mini-SAS 1x Cable
(from HBA/Interposer with SFF-8088
to drive with SFF-8088).
4 m Mini-SAS HD/Mini-SAS 1x
Cable
Enables attachment of a single tape
drive to a host with HD applications
(from HD HBA with SFF-8644 to
drive with SFF-8088 connector).
Transparent LTO Encryption
Rack Mount Kit with RML Line Cord
Deskside Kit
Extra Cartridge Magazine
Ultrium 8 data cartridges (5-pack)
Customer Replaceable Units (CRUs)
The TS2900 Tape Autoloader has customer replaceable units (CRUs) that must be added, removed, and
replaced by the customer. If you choose to have the CRU added, removed, or replaced by an IBM Service
Representative, there is a charge for the service.
Note: There are two CRU Part Numbers for the S4H Generation 4 Tape Drive Library Chassis. Refer to
the Serial Number on the S4H library that is being replaced. Use this Serial Number to determine which
S4H CRU Part Number is the correct CRU.
© Copyright IBM Corp. 2009, 2018
Feature Code
5402
5406
5502
5506
5507
5901
7006
7010
8111
8706
HVEC Part Number
95P4711
95P4712
95P4713
95P4714
46C2900
45E3797
45E3785
45E3789
45E3793
01PL340
159