Leader Pin In The Incorrect And Correct; Placing The Dislodged Leader Pin Into The Correct Position - IBM TS2900 Setup, Operator, And Service Manual

Figure 120. Leader pin in the incorrect and correct positions. The cartridge door is open and the leader pin is visible
inside the cartridge.
To reposition the leader pin, complete the following steps.
Procedure
1. Slide open the cartridge door ( 1 in Figure 121) and locate the leader pin 2 (you might need to
shake the cartridge gently to roll the pin toward the door).
2. With plastic or blunt-end tweezers, grasp the leader pin and position it in the pin-retaining spring
clips 3 .
3. Press the leader pin gently into the clips until it snaps into place and is firmly seated.
4. Close the cartridge door.
Figure 121. Placing the dislodged leader pin into the correct position. The cartridge door is open to show the leader
pin.
119
Media