Installing In A Rack; Rack Mount Assembly Kit - IBM TS2900 Setup, Operator, And Service Manual

Figure 20. Attaching the cover to the library chassis (rear screws)
6. Place the library in the wanted desktop location.
Important: Do not place the library on its side. Do not stack objects on top of the library.

Installing in a rack

The TS2900 Tape Autoloader can be easily installed into a standard 19-inch rack system. A standard
19-inch rack system contains multiple mounting locations that are called EIA units as defined by the
Electronics Industries Association. Each EIA unit contains three square or round holes that are used to
mount rack designed equipment. The library requires 1 EIA unit (1U) of rack space. Each unit is
separated by a small space.
Table 15 lists the parts in the rack mount assembly kit. A Phillips head screwdriver (preferably with a
magnetic head) is needed to assemble the rack mount kit.
Table 15. Rack mount assembly kit
Number Part Number
1
45E3741
2
45E3742
3
45E3743
26
IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572
Quantity Description
1 Left rear bracket
1 Right rear bracket
1 Left front bracket
4
Part