IBM TS2900 Setup, Operator, And Service Manual page 54

Table 15. Rack mount assembly kit (continued)
Number Part Number
11
45E3867
12
07H6655
13
39M5378
When you decide on a location in your rack for the library, consider that the Operator Panel has a small
LCD screen. The library must be positioned to allow for easy viewing. The rear of the library must be
free from any obstructions to allow easy access to the power switch and other rear panel components.
Note: Before you begin the rack installation of the library, read the safety information in "Rack safety" on
page xix. Also, verify that no desktop feet are attached to the bottom of the library.
To install the library in a rack:
1. Verify that your rack kit includes all the necessary contents. See Table 15 on page 26.
2. Determine the location in your rack for your library to be installed. With a pencil, mark the location
on the front vertical rails (Figure 21 on page 29) and rear vertical rails (Figure 22 on page 29) in your
rack.
28
IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572
Quantity Description
Screw,
2 cross-recessed pan
head, M6x10
Hook-and-loop
1
fastener strap
Rack device to
1
PDU power cord
Part
E E
N N L L