IBM TS2900 Setup, Operator, And Service Manual page 178

6. Slide the library chassis into the rack. Secure the front of the library to the rack with the large black
screws 11 in the bottom holes on each front bracket (Figure 149).
Figure 149. Securing the front of the library in the rack
7. Secure the rear of the library to the rack with 2 round-head screws 10 on each rear bracket
(Figure 150). Tighten the other rear bracket screws to secure the library to the rack.
Figure 150. Securing the rear of the library in the rack
8. Run the SAS cable, power cable, and Ethernet cable through the hook-and-loop fastener strap 12 ,
then tighten the strap (Figure 151 on page 153)
152
IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572
11
10 10