Safety And Environmental Notices; Safety Notices - IBM TS2900 Setup, Operator, And Service Manual

Safety and environmental notices

Safety notices and environmental notices for this product are shown and described.

Safety notices

Observe the safety notices when this product is used. These safety notices contain danger and caution
notices. These notices are sometimes accompanied by symbols that represent the severity of the safety
condition.
Most danger or caution notices contain a reference number (Dxxx or Cxxx). Use the reference number to
check the translation in the IBM Systems Safety Notices, G229-9054 manual.
The sections that follow define each type of safety notice and give examples.
Danger notice
A danger notice calls attention to a situation that is potentially lethal or extremely hazardous to people. A
lightning bolt symbol always accompanies a danger notice to represent a dangerous electrical condition.
A sample danger notice follows:
DANGER: An electrical outlet that is not correctly wired could place hazardous voltage
on metal parts of the system or the devices that attach to the system. It is the
responsibility of the customer to ensure that the outlet is correctly wired and grounded to
prevent an electrical shock. (D004)
Caution notice
A caution notice calls attention to a situation that is potentially hazardous to people because of some
existing condition, or to a potentially dangerous situation that might develop because of some unsafe
practice. A caution notice can be accompanied by one of several symbols:
If the symbol is...
© Copyright IBM Corp. 2009, 2018
It means...
A hazardous electrical condition with less severity than electrical danger.
A hazardous condition that is not represented by other safety symbols.
This product contains a Class II laser. Do not stare into the beam. (C029)
Laser symbols are always accompanied by the classification of the laser as
defined by the U. S. Department of Health and Human Services (for
example, Class I, Class II).
A hazardous condition due to mechanical movement in or around the
product.
xvii