Table of Contents
Advertisement
The library firmware revision is displayed in the top left corner of the OCP and RMI screen.
The expansion module will operate using the existing library firmware. It is recommended that you
always update the library to the latest firmware version.
You can update firmware from the RMI or OCP Maintenance > Firmware Upgrades > System
Firmware screen.
Downloading product firmware
Procedure
1. Navigate to the HPE Support website: http://www.hpe.com/support/storage
IMPORTANT:
Access to some updates might require product entitlement when accessed through the Hewlett
Packard Enterprise Support Center. You must have an HPE Passport set up with relevant
entitlements.
To view and update your entitlements, and to link your contracts and warranties with your profile,
navigate to: http://www.hpe.com/support/AccessToSupportMaterials
2. Browse or search for the necessary firmware.
3. Download the firmware.
To upgrade firmware from the OCP, copy the firmware image onto a FAT-32 formatted USB flash drive.
Installing or replacing a power supply
Prerequisites
Tools required
#2 Phillips screwdriver
Procedure
1. If replacing a failed power supply,
a. Identify the failed component
b. Remove the failed power supply
2. If installing an optional power supply in the module, remove the power supply bay cover.
3. Install the new power supply
4. If necessary, power on the library
5. Verify the power supply installation
128
Downloading product firmware
Advertisement
Table of Contents
