Fan Module; Installing A Node Power Supply; Placing The Power Cord In The Strain Relief Clip - HP StorageWorks 12000 - Virtual Library System EVA Gateway User Manual
Hp storageworks 12000 gateway virtual library system user guide (ah814-96014, march 2010)
Hide thumbs
Also See for StorageWorks 12000 - Virtual Library System EVA Gateway:
- User manual (264 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
2.
Slide the power supply into the bay until it clicks.
Figure 62 Installing a node power supply
.
3.
Use the strain relief clip to secure the power cord.
Figure 63 Placing the power cord in the strain relief clip
.
4.
Connect the power cord to the power supply.
5.
Be sure that the power supply LED is green.
6.
Be sure that the front panel external health LED is green.
Fan Module
CAUTION:
Do not operate the node for long periods without the access panel. Operating the node without the
access panel results in improper airflow and improper cooling that can lead to thermal damage.
1.
Power off the node.
2.
Extend or remove the node from the rack. See
the Node from the
3.
Remove the access panel.
206
Component Replacement
Rack.
Extending the Node from the Rack
or
Removing
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks 12000 - Virtual Library System EVA Gateway and is the answer not in the manual?
Questions and answers