HP StoreEver MSL3040 User's And Service Manual page 75

TIP: This option is only selectable when the following requirements are met:
◦
◦
• LTO7+ DPF —The LTO-7+ data path failover features are enabled. With LTO-7+ data path
failover, the failover driver on the backup host operating system and library work together to
detect a failed drive port and transfer the data path to the other drive port as quickly as possible,
resulting in most recoveries completing before the standard command timeout.
TIP: This option is only selectable when the following requirements are met:
◦
◦
◦
NOTE:
LTO-7+ Path Failover requires a driver to be installed on all backup application servers that will
access the partition. For information about LTO-7+ Path Failover, including installing and using
failover software, see the LTO-7 and later generation failover user guide.
15. Verify the partition configuration and then click Finish .
16. After the wizard reconfigures the partition, the library will come on line automatically.
Deleting a partition using the expert partition wizard
NOTE:
When Data Verification is enabled from Command View TL, Command View TL creates a partition called
"DVP" on the library, which is used to import media into the library for Data Verification. Hewlett Packard
Enterprise recommends only deleting or modifying the DVP partition from the Command View TL user
interface rather than from the library RMI. Do not name a partition "DVP" because this name is reserved
for Command View TL.
Procedure
1. Select the partition.
2. Click Remove.
3. Click Next.
4. Verify that you want to remove the partition and then click Finish.
After the wizard removes the partition, the library will come on line automatically.
The drive is an LTO-6 dual-ported FC drive.
The HPE MSL3040 LTO-6 Data Path (DataP) Failover License has been added to the
library.
The drive is an LTO-7 or later generation FC drive.
LTO-6 Advanced Control Path Failover is NOT enabled for the partition containing the
drive.
The HPE MSL3040 LTO-7+ Path Failover License has been added to the library.
Operating the library 75