HP StoreEver MSL3040 User's And Service Manual page 201

Tape libraries
Table of Contents

Advertisement

Event
Message text and description
code
2022
Drive has been hot removed while in
active status as LUN master. Tape drives
must be powered off before removing
them from the library.
2023
Internal software error.
2024
Exception thrown by application not
handled.
2025
Move failure due to vertical robotic
positioning problem.
2026
Failed moving the robot towards the
back or front of the library.
2027
Move failed pulling cartridge from slot.
2028
Move failed inserting cartridge to slot.
Details and solution
Reinsert the removed drive in the same position
from which it was removed.
Reboot the library.
An unrecoverable error occurred. Retry the
operation and if the error persists reboot the
library.
1. Check for obstructions, such as a cartridge
sticking out, in the vertical pathway of the
robotics assembly.
2. Verify that the robotic assembly is aligned
and level within the library.
3. Verify that the rack is level front to back and
side to side.
4. Clear any obstructions from the bottom of
the library. For instructions, see Clearing
obstructions from the library on page 182.
Check for obstructions, such as a cartridge
sticking out or cable impeding progress, in the
horizontal pathway of the robotics assembly.
Inspect the cartridge and cartridge labels for
physical damage that could prevent the
cartridge from being inserted into or
removed from the slot.
Clear any obstructions from the bottom of
the library. For instructions, see Clearing
obstructions from the library on page 182.
Table Continued
Event codes
201

Advertisement

Table of Contents
loading

Table of Contents