Table of Contents
Advertisement
III.
Verify that the lowest module in the library has its alignment mechanism secured in the
unlocked position.
IV.
Move to the front of the library. Tighten the captive fasteners on all modules until the
fasteners are finger tight. Do not over tighten.
6. Reinstall any available drive bay cover plates over any open drive bays.
7. Cover or wrap the rack with anti-static plastic. If available, install a layer of cardboard for additional
protection.
The rack and library are ready for shipment in a padded van.
Shipping a module outside of a rack
Follow this procedure when shipping one or more modules without their rack.
190
Shipping a module outside of a rack
If you encounter resistance, adjust the upper module position. The pin in the alignment
mechanism must move easily into the hole in the lower module. When the alignment
mechanism is in the locked position, release the spring-loaded lock if necessary.
CAUTION:
Do not use the alignment mechanism to force the modules into alignment.
The alignment mechanism is designed to hold the modules in position once they are
aligned. It is not intended to adjust the module positions.
1
2
Advertisement
Table of Contents
