Table of Contents
Advertisement
Event
Message and description
code
4054
Chassis fan failed
4055
Encryption configuration failed
4056
Failed to copy settings from active to
passive drive in basic control path failover.
4057
Passive control path drive not available for
control path failover.
4058
Disabling active control path drive caused
failover to passive one.
4059
A drive that does not support encryption is
configured in a partition with encryption
enabled.
4060
Connection to the KMIP server failed.
4061
Key not found on KMIP server.
4062
Key creation on KMIP server failed.
4063
KMIP configuration invalid.
222
Event codes
Details and solution
Check the event details to see which
chassis fan failed.
Verify that the chassis fan is spinning and
there are no obstructions in the fan.
Check surrounding events for details and
then retry the operation.
The partition no longer has a passive drive
that is available for control path failover.
Reconfigure the partition so that at least one
drive in the partition is available for control
path failover.
Verify that the configured control path
failover drive is present, powered on, and
ready to accept the control path.
If the failover is unplanned or unexpected,
verify that the host still sees both the active
and passive drives. If necessary, reconfigure
a different passive drive for the partition.
A drive that does not support encryption is
configured as part of a partition with
encryption enabled. The library has taken
the drive offline. Replace the drive with an
LTO-4 or later generation drive or disable
encryption for the partition.
1. Verify the username and password
configured to log in to the KMIP server.
2. Verify that all necessary SSL certificates
have been configured.
3. Verify that the KMIP server is reachable
within the network.
4. Verify that the configured IP addresses
and/or hostnames are correct.
Verify that the requested key is available on
the KMIP server. Check the KMIP server
logs for additional details.
Check the KMIP server logs for additional
details about why key creation failed.
Use the KMIP configuration wizard to verify
the KMIP configuration.
Table Continued
Advertisement
Table of Contents
