Table of Contents
Advertisement
Event code Message
9045
Library configuration data failed to duplicate onto the base module.
1. Attempt to save the library configuration from the Configuration > System, Save/
Restore Configuration screen. If additional information, see Saving the library
configuration on page 57.
2. Power cycle the library.
3. Retry the operation.
9046
The chassis fan speed could not be determined. This is not a critical event. This fan
provides enhanced cooling for unusually high temperature environments. The chassis fan
can be removed without interrupting the library operation. Remove the chassis fan, check
for any obstructions in the fan, and reinsert it. If the chassis fan event persists after it is
removed and reinserted, the fan should be replaced when convenient.
9047
MSL Encryption Kit backup has been initiated
9048
MSL Encryption Kit restore has been initiated.
9049
MSL Encryption Kit partial backup has been initiated.
9050
More than five invalid MSL Encryption Kit PIN attempts.
9051
MSL Encryption Kit key server token contains keys that have not been backed up.
9052
MSL Encryption Kit key server token is full. Adding or generation new keys is prohibited.
9053
MSL Encryption Kit key provided.
9054
Not at BOT without read.
9055
MSL Encryption Kit key server token not present.
9056
MSL Encryption Kit key server token was inserted.
9057
MSL Encryption Kit key server token was removed.
9058
Power supply fan failed.
Event codes
237
Advertisement
Table of Contents
