Configuring Ldap User Accounts - HP StoreEver MSL3040 User's And Service Manual

a. To allow access the magazines, select Allow magazine access by the "user" user account.
b. To allow access to the mailslots, select Allow mailslot access by the "user" user account.
3. Click Submit.
Changing the OCP PIN from the RMI
Procedure
1. Navigate to the Configuration > User Accounts > Local User Accounts screen.
2. In the Modify OCP PINs section, click Modify OCP PINs.
3. Select the user in the Name field.
Only the administrator and user users can log in from the OCP.
4. Enter the new PIN in the PIN and Verify PIN fields.
The PIN must be a number that contains exactly four digits. For example, "1234".
5. Click Modify.
Removing a local user account
Procedure
1. Navigate to the Configuration > User Accounts > Local User Accounts screen.
2. In the Local Users section, click Delete next to the user name.
3. Click Yes to confirm.

Configuring LDAP user accounts

Prerequisites
Prerequisites for configuring LDAP user accounts
Procedure
1. Navigate to the Configuration > User Accounts > LDAP screen.
2. If not already listed, add your LDAP servers.
a. In the LDAP Servers area, enter your LDAP server's IP address or domain name, and then click
Add Server.
The RMI displays the Add Server dialog.
b. Enter all of the requested LDAP configuration settings in the Primary Server area.
See your LDAP server documentation or local LDAP administrator for the preferred values for the
various LDAP configuration settings, such as the port number and distinguished names.
86 Changing the OCP PIN from the RMI