Cisco Catalyst 3560-X Command Reference Manual page 34

aaa accounting dot1x
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Note
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-2
Downloaded from www.Manualslib.com
radius (Optional) Enable RADIUS authorization.
tacacs+ (Optional) Enable TACACS+ accounting.
AAA accounting is disabled.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
This command requires access to a RADIUS server.
We recommend that you enter the dot1x reauthentication interface configuration command before
configuring IEEE 802.1x RADIUS accounting on an interface.
This example shows how to configure IEEE 802.1x accounting:
Switch(config)# aaa new-model
Switch(config)# aaa accounting dot1x default start-stop group radius
The RADIUS authentication server must be properly configured to accept and log update or watchdog
packets from the AAA client.
Command Description
aaa authentication Specifies one or more AAA methods for use on interfaces running
dot1x IEEE 802.1x.
aaa new-model Enables the AAA access control model. For syntax information, see the
Cisco IOS Security Command Reference, Release 12.2 > Authentication,
Authorization, and Accounting > Authentication Commands.
dot1x reauthentication Enables or disables periodic reauthentication.
dot1x timeout Sets the number of seconds between re-authentication attempts.
reauth-period
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02