Boot Helper-Config-File - Cisco Catalyst 2960 Command Reference Manual

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands

boot helper-config-file

Use the boot helper-config-file global configuration command to specify the name of the configuration
file to be used by the Cisco IOS helper image. If this is not set, the file specified by the CONFIG_FILE
environment variable is used by all versions of Cisco IOS that are loaded. Use the no form of this
command to return to the default setting.
Syntax Description filesystem:
/file-url
Defaults
No helper configuration file is specified.
Command Modes Global configuration
Command History Release
12.2(25)FX
Usage Guidelines This variable is used only for internal development and testing.
Filenames and directory names are case sensitive.
This command changes the setting of the HELPER_CONFIG_FILE environment variable. For more
information, see
Related Commands Command
show boot
78-16882-01
boot helper-config-file filesystem:/file-url
no boot helper-config file
Modification
This command was introduced.
Appendix A, "Catalyst 2960 Switch Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Alias for a flash file system. Use flash: for the system board flash
device.
The path (directory) and helper configuration file to load.
Catalyst 2960 Switch Command Reference
boot helper-config-file
2-21