Boot Helper-Config-File - Cisco Catalyst 3120 Command Reference Manual

Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

boot helper-config-file

Use the boot helper-config-file global configuration command on the switch stack or on a standalone
switch to specify the name of the configuration file to be used by the Cisco IOS helper image. If this is
not set, the file specified by the CONFIG_FILE environment variable is used by all versions of Cisco
IOS that are loaded. Use the no form of this command to return to the default setting.
Syntax Description
filesystem:
/file-url
Defaults
No helper configuration file is specified.
Command Modes
Global configuration
Command History Release
12.2(40)EX
Usage Guidelines
This variable is used only for internal development and testing.
Filenames and directory names are case sensitive.
This command changes the setting of the HELPER_CONFIG_FILE environment variable. For more
information, see
Related Commands Command
show boot
OL-12248-01
boot helper-config-file filesystem:/file-url
no boot helper-config file
Modification
This command was introduced.
Appendix A, "Cisco Catalyst Blade Switch 3120 for HP Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Alias for a flash file system. Use flash: for the system board flash
device.
The path (directory) and helper configuration file to load.
Cisco Catalyst Blade Switch 3120 for HP Command Reference
boot helper-config-file
2-33