Boot Helper-Config-File - Cisco ME 3800X Command Reference Manual

boot helper-config-file

boot helper-config-file
To specify the name of the configuration file to be used by the Cisco IOS helper image, use the boot
helper-config-file command in global configuration mode. If this is not set, the file specified by the
CONFIG_FILE environment variable is used by all versions of Cisco IOS that are loaded. To return to
the default setting, use the no form of this command.
Syntax Description file-name
Defaults
No helper configuration file is specified.
Command Modes Global configuration
Command History Release
12.2(52)EY
Usage Guidelines
This variable is used only for internal development and testing.
Filenames and directory names are case sensitive.
This command changes the setting of the HELPER_CONFIG_FILE environment variable. For more
information, see
Related Commands Command
show boot
Cisco ME 3800X and ME 3600X Switch Command Reference
2-22
boot helper-config-file filename
no boot helper-config file
Modification
This command was introduced.
Appendix A, "Cisco ME 3800X and ME 3600X Switch Boot Loader Commands."
Description
Displays the settings of the boot environment variables.
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
The helper configuration file to load.
OL-28238-01