19 Serial Handwheels
19.1 HR 130 Handwheel
HR130
Checking data
The HR 332 serial handwheel with auxiliary keys can be checked using an oscilloscope.
transmission
The following signals can be measured at handwheel input X23 of the MC. The signals
must correspond to the following diagram:
July 2002
Pin 6 DTR
0 V
Pin 8 RxD
0 V
t = 6 ms
Note
Power is supplied to the handwheel via the MC.
(X23, pin 2 = 0 V, pin 4 = + 12 V)
19 – 263