HEIDENHAIN iTNC 530 Service Manual page 341

MP
MP7470
MP7471
MP7475
MP7480
MP7480.0
MP7480.1
July 2002
Function and input
Maximum contouring tool feed rate at 100% override
Input: 0 to 300,000 [mm/min]
0: No limitation
Maximum velocity of the principle axes during
compensating movements through M128
Input: 0 to 300,000 [mm/min]
Reference for datum table
Input: 0: Reference is workpiece datum
1: Reference is machine datum (MP960.x)
Output of the tool or pocket number
With TOOL CALL block
Input: 0: No output
1: Tool number output only when tool number
changes
2: Tool number output for every TOOL CALL
block
3: Output of the pocket number and tool number
only when tool number changes
4: Output of the pocket number and tool number
for every TOOL CALL block
5: Output of the pocket number and tool number
only when tool number changes. Pocket table is
not changed.
6: Output of the pocket number and tool number
for every TOOL CALL block. Pocket table is not
changed.
With TOOL DEF block
Input: 0: No output
1: Tool number output only when tool number
changes
2: Tool number output for every TOOL DEF block
3: Output of the pocket number and tool number
only when tool number changes
4: Output of the pocket number and tool number
for every TOOL DEF block
Software
version and
behavior
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
25 – 339