HEIDENHAIN iTNC 530 Service Manual page 320

MP
MP4120.0-47
MP4130.0
MP4130.1
MP4130.2-5
MP4131.0
MP4131.1
MP4131.2-5
MP4210.0-47
MP4220.0-4
MP4230.0-31
MP4231.0-31
MP4310.0-6
25 – 318
Function and input
PLC counter preset value
Input: 0 to 1 000 000.000 [s or PLC cycles, depending
on MP4020, bit 11]
Number of the high-speed PLC input for switching off the
monitoring functions
Reserved
Numerical designation for fast PLC inputs
Input: 0 to 255 [no. of the PLC input]
Activation criterion for fast PLC input for switching off the
monitoring functions
Reserved
Activation criterion for fast PLC inputs
Input: 0: Activation at low level
1: Activation at high level
Setting a number in the PLC (D768 to D956)
Input: -99,999.9999 to +99,999.9999
Setting a number in the PLC (W960 to W968)
Input: 10 to 30,000
Setting a number in the PLC (Module 9032)
Input: -99,999.9999 to +99,999.9999
Setting a number in the PLC (Module 9032)
Input: -99,999.9999 to +99,999.9999
Setting a number in the PLC (W976 to W988, M4300
to M4411)
Input: 10 to 30,000
Software
version and
behavior
PLC
RUN
HEIDENHAIN Service Manual iTNC 530