HEIDENHAIN iTNC 530 Service Manual page 251

Meaning of the soft keys:
Meaning of the soft keys:
Select one of the six channels using the cursor keys (arrow keys around the
GOTO key).
Press the arrow keys on the VDU to switch the soft-key row and display the
following symbols:
Soft-key row 1:
Soft-key row 2:
Soft-key row 3:
July 2002
Back to setup menu.
Start recording. The recording is ended either with a trigger
condition or with the STOP soft key.
Exit the oscilloscope function.
Move the signal down.
Move the signal up.
Decrease the vertical resolution.
Increase the vertical resolution.
Optimum vertical resolution.
The signal is centered in the picture.
Optimum display of the signal considering the zero line.
Activating the second cursor.
Exit the oscilloscope function.
Move the signals to the left.
Move the signals to the right.
Decrease the horizontal resolution.
Increase the horizontal resolution.
Invert the signal.
Exit the oscilloscope function.
17 – 249