Exchanging The Cc - HEIDENHAIN iTNC 530 Service Manual

23.6 Exchanging the CC


Preparing the Move the swivel head to a defined position or basic position.
Contact your machine manufacturer for more information.
machine
 Move the tool changer to a defined position.
Contact your machine manufacturer for more information.

Move the axes away from the hardware limit switches, to the middle of the traverse range.
Removing the  Switch off the main switch of the machine.
defective CC
 Label and remove all of the connections on the CC and the MC.
 Dismount the CC component together with the MC from the electrical cabinet.

Separate the MC from the defective CC.
Integrating the  Connect the MC with the new CC.
new CC

Mount the new CC together with the MC in the electrical cabinet.
 Re-establish all of the connections on the CC and the MC.
23 – 294
Caution
Observe the ESD precautions.
Caution
Do not confuse any of the connectors!
HEIDENHAIN Service Manual iTNC 530