HEIDENHAIN iTNC 530 Service Manual page 335

MP
MP7310
MP7315
MP7316
MP7317
MP7317.0
MP7317.1
MP7330.0-15
MP7340.0-15
July 2002
Function and input
Graphic display mode
Format: %xxxxxxxx
Input: Bit 0 – Projection in three planes:
0: German-preferred projection
1: US-preferred projection
Bit 1 - Rotating the coordinate system in the
working plane by 90°:
0: No rotation
1: Rotation by +90°
Bit 2 – BLK form after datum shift:
0: Shifted
1: Not shifted
Bit 3 – Display of the cursor position:
0: No display
1: Display
Bit 4 - Reserved
Bit 5 - Graphics during program test
0: 2.5-D
1: 3D
Bit 6 - Graphics during program run
0: 2.5-D
1: 3D
Bit 7 – Reserved
Tool radius for graphic simulation without TOOL CALL
Input: 0.0000 to 99,999.9999 [mm]
Penetration depth of the tool
Input: 0.0000 to 99,999.9999 [mm]
M function for graphic simulation
Beginning of graphic simulation
Input: 0 to 88
Interruption of the graphic simulation
Input: 0 to 88
Specifying the user parameters 1 to 16
Input: 0 to 9999.00 (no. of the user parameter)
Dialog messages for user parameters 1 to 16
Input: 0 to 4095 (line number of the PLC dialog
message file)
Software
version and
behavior
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
CN123
PLC
RUN
PLC
RUN
25 – 333