Tnc Partition (Tnc:\) - HEIDENHAIN iTNC 530 Service Manual

12.3 TNC Partition (TNC:\)


Calling the Press the following key combination to call the TNC partition:
TNC partition
The directory structure is displayed on the left side of the screen.
July 2002
 Select Programming and Editing operating mode
 Call the program management
You can move to the corresponding subdirectories using the UP and DOWN
arrow keys. The selected directory is indicated in the header.
The right side of the screen shows all of the files contained in the selected
directory. Use the LEFT and RIGHT arrow keys to move between the directory
and file side of the screen.
Note
Under RS232/RS422 SETUP the user can switch between the standard display (without
subdirectories, similar to TNC 415) and the enhanced display mode (with subdirectories)
via the selection field PGM MGT.
The soft key RS232/RS422 SETUP is displayed after pressing the MOD key (while the
program management is displayed).
12 – 203