HEIDENHAIN iTNC 530 Service Manual page 245

Offset adjusting via Procedure:
code number

Press one of the following soft keys.
July 2002
 Select the Programming and Editing mode.
 Prepare iTNC for entry of code number.

Enter the code number.
 Confirm.
Carry out an offset compensation. The values are stored in the nonvolatile
memory.
Offset adjusting via code number compensates the current offset values. Later
changes in offset are not compensated.
Do not carry out an offset compensation, or end a previous compensation.
Exit the menu without making any changes.
16 – 243