Intel® Server System S7000FC4UR TPS
4.1.5
Memory Riser LEDs
The following table describes all the LEDs on the memory riser.
Name
FRU pwr good
01 LED
02 LED
03 LED
04 LED
05 LED
06 LED
07 LED
08 LED
4.1.6
Power Rails
The main board supplies 12V, 5V, 3.3V, and 3.3V_stby power to the memory riser. The Memory
Riser has on-board regulators to generate 1.5V, 1.8V and 0.9V. The FBD AMB requires 1.5V,
the FBD AMB and DDR2 DRAM require 1.8V, and the DDR2 termination requires 0.9V. The
DIMM EEPROM and AMB SPD Bus require 3.3V. DIMM LEDs and control circuits require
3.3V_stby.
Revision 1.0
Table 13. Memory Riser LED Descriptions
Color
Green
Memory Riser Power is good
Amber
DIMM1 has had an error and needs to be replaced
Amber
DIMM2 has had an error and needs to be replaced
Amber
DIMM3 has had an error and needs to be replaced
Amber
DIMM4 has had an error and needs to be replaced
Amber
DIMM5 has had an error and needs to be replaced
Amber
DIMM6 has had an error and needs to be replaced
Amber
DIMM7 has had an error and needs to be replaced
Amber
DIMM8 has had an error and needs to be replaced
Description
Memory Riser
53