Intel S7000FC4UR Technical Product Specification page 203

Intel® Server System S7000FC4UR TPS
Setup Item
Reset on Fatal Error
FRB-2 Enable
OS Boot Watchdog
Timer
OS Boot Watchdog
Timer Policy
OS Boot Watchdog
Timer Timeout
Console Redirection
System Information
®
Intel Remote
Management Module
Information
Revision 1.0
Options
Enabled [Enabled] – System will trigger a
reset on fatal errors.
Disabled
[Disabled] – System will trigger a
Non-Maskable Interrupt on fatal
errors.
Fault Resilient Boot (FRB).
Enabled
Disabled BIOS programs the BMC watchdog
timer for approximately 6 minutes. If
BIOS does not complete POST
before the timer expires, the BMC
will reset the system.
Enabled BIOS programs the watchdog timer
with the timeout value selected. If
Disabled
the OS does not complete booting
before the timer expires, the BMC
will reset the system and an error is
logged.
Requires OS support or Intel
System Management Software.
If the OS watchdog timer is
Power Off
enabled, this is the system action
Reset
taken if the watchdog timer expires.
[Reset] – System performs a reset.
[Power Off] – System powers off.
5 minutes If the OS watchdog timer is
enabled, this is the timeout value
10 minutes
BIOS will use to configure the
15 minutes
watchdog timer.
20 minutes
View/Configure console redirection
information and settings.
View system information.
View Intel
Help Text
®
®
RMM2 information.
BIOS User Interface
Comments
The system normally generates
a NMI in response to fatal errors
at runtime. The operating
system typically halts the system
in response to NMI thereby
containing potential data
corruption.
The user can configure this
option to Enabled for Operating
Systems that do not respond to
an NMI with a system halt. This
ensures the corrupted data is
contained by the reset.
Takes user to Console
Redirection screen.
Takes user to System
Information screen.
®
Takes user to Intel Remote
Management Module
Information screen.
This menu item should be
suppressed if the I/O riser board
is not installed.
181