Post Error Manager Messages And Handling - Intel S7000FC4UR Technical Product Specification

BIOS Error Handling
Progress Code
Runtime Phase / EFI Operating System Boot
0xF4
0xF5
0xF8
0xF9
0xFA
Pre-EFI Initialization Module (PEIM) / Recovery
0x30
0x31
0x34
0x35
0x3F
19.3.3

POST Error Manager Messages and Handling

The POST Error Manager displays error messages reported by the system BIOS during POST.
The system BIOS truncates the 32-bit EFI POST Progress Code associated with the error to 16-
bit values for display in the POST Error Manager.
The POST Error Manager behavior in response to the error is defined by the error severity
reported by the BIOS. Errors are categorized in one of three severity levels. The system
behavior in response to severity level of fatal, major, or minor
19.3.3.1 Fatal
The system behavior in response to fatal error is described below:
BIOS logs an error to the POST Error Manager.
BIOS logs an error message to the BMC System Event Log (SEL).
BIOS unconditionally enters POST Error Manager to display error message.
BIOS halts the system to prevent boot.
The user needs to replace the faulty part and restart the system.
19.3.3.2 Major
The system behavior in response to major error is described below:
BIOS logs an error to the POST Error Manager.
BIOS logs an error message to the BMC System Event Log (SEL).
238
Entering sleep state
Exiting sleep state
Operating system has requested EFI to close boot services
ExitBootServices ( ) has been called
Operating system has switched to virtual address mode
SetVirtualAddressMap ( ) has been called
Operating system has requested the system to reset
ResetSystem () has been called
Crisis recovery has been initiated because of a user request
Crisis recovery has been initiated by software (corrupt flash)
Loading crisis recovery capsule
Handing off control to the crisis recovery capsule
Unable to complete crisis recovery.
Intel order number E18291-001
Progress Code Definition
ESB2 BMC Core TPS
Revision 1.0