Table 12. Post Error Messages And Handling - Intel M50CYP2UR Series System Integration And Service Manual

Intel® Server System M50CYP2UR Family System Integration and Service Guide
Error Code
0012 System RTC date/time not set
0048 Password check failed
0140 PCI component encountered a PERR error
0141 PCI resource conflict
0146 PCI out of resources error
0191 Processor core/thread count mismatch detected
0192 Processor cache size mismatch detected
0194 Processor family mismatch detected
Processor Intel(R) UPI link frequencies unable to
0195
synchronize
0196 Processor model mismatch detected
0197 Processor frequencies unable to synchronize
5220 BIOS Settings reset to default settings
5221 Passwords cleared by jumper
5224 Password clear jumper is Set
8130 CPU 0 disabled
8131 CPU 1 disabled
8160 CPU 0 unable to apply microcode update
8161 CPU 1 unable to apply microcode update
8170 CPU 0 failed Self-Test (BIST)
8171 CPU 1 failed Self-Test (BIST)
8180 CPU 0 microcode update not found
8181 CPU 1 microcode update not found
8190 Watchdog timer failed on last boot.
8198 OS boot watchdog timer failure.
8300 Baseboard Management Controller failed self-test.
8305 Hot Swap Controller failure
83A0 Management Engine (ME) failed self-test.
83A1 Management Engine (ME) Failed to respond.
84F2 Baseboard management controller failed to respond
84F3 Baseboard Management Controller in Update Mode.
Baseboard Management Controller Sensor Data Record
84F4
empty.
84FF System Event Log full
Memory component could not be configured in the
85FC
selected RAS mode
8501 Memory Population Error
8502 PMem invalid DIMM population found on the system.
8520 Memory failed test/initialization CPU0_DIMM_A1
8521 Memory failed test/initialization CPU0_DIMM_A2
8522 Memory failed test/initialization CPU0_DIMM_A3
138

Table 12. POST Error Messages and Handling

Error Message Action message
Put right password.
Enable Memory Mapped I/O above 4
GB item at SETUP to use 64-bit MMIO.
Use identical CPU type.
Use identical CPU type.
Use identical CPU type.
Use identical CPU type.
Use identical CPU type.
Recommend reminding user to install
BIOS password as BIOS admin
password is the master keys for
several BIOS security features.
Update right SDR.
Clear SEL through EWS or SELVIEW
utility.
Plug DIMM at right population.
Populate valid POR PMem DIMM
population.
Remove the disabled DIMM.
Remove the disabled DIMM.
Remove the disabled DIMM.
Type
Major
Major
Major
Major
Major
Fatal
Fatal
Fatal
Fatal
Fatal
Fatal
Major
Major
Major
Major
Major
Major
Major
Major
Major
Minor
Minor
Major
Major
Major
Major
Major
Major
Major
Major
Major
Minor
Major
Major
Major
Major
Major
Major